How do I set up my Avive AED Charge Stand?

To install the Avive AED Charge Stand, you will need the following: 

• a tape measure
• a level
• a drill
• all the materials included in the box with your Charge Stand (i.e. 2 wall anchors, 2 screws, USB Power Adaptor)

Installation is quick and easy!

1. Identify where you want to install the charge stand 
2. Mark on the wall where you want to drill the holes 
3. Drill two holes into the wall
4. Install anchors on the wall
5. Adjust the charging cable to the desired length, and screw the charge stand into place.
6. Once secure, place your Avive Connect AED in the stand and plug it in to start charging!